I started with the easy stuff. Front and back wheels off. I search the chain for a master link but don’t see one, no worries. I am turning this sucker into a single speed anyway, I will just remove the front and back derailleurs with the chain still looped through them…wait.
I will be getting a new half-link chain in an effort to match the magic length of a single speed chain without the use of a tensioner. Since I am not worried about reusing this one, I just take a screwdriver and a pair of pliers and snap a link in half to remove it.
Next, I fish all of the brake and derailleur cables out of the cable guides and remove them. The front forks and the cockpit are in dire need of a replacement, I am looking forward to saying goodbye to the twist grip gear selector but in all honesty, I don’t really know how to remove them. So I don’t, I take the entire handlebar assembly off as a whole, and just leave the forks and headset.
I unscrew each piece of the headset allowing the forks to fall right out. I reassemble the headset as it was for reference when it comes to buying the new forks and new headset. I leave the internal cups for now, I hope to maybe be able to reuse them.
I remove the rear rim brake assembly and the pedals with the help of a cowboy and bedhead riddled little man. Tip – both pedals unscrew towards the rear of the bike so the right side unscrews counter clockwise, and the left side unscrews clockwise.
For the bottom bracket I employ a plumbers wrench, another tip – on the non-gear side the nut unscrews clockwise. I remove the bracket and reassemble this as well for future reference. I leave the internal cups in here as well for possible reuse.
Oddly enough, the old kickstand is the hardest piece for me to remove because I don’t have a big enough allen wrench, I remove the stand itself with its spring but have to leave the bracket on for now.
Last thing left to do is clean it up a bit…
Tools used for this step:
Open ended ⅝” wrench
Flat head screwdriver
Allen wrench set
Total Cost so far: $0.00
I will be giving the frame a light sanding and will repaint it next, then reassembly will begin – stay tuned.
Donate to Hygge-lism
Please consider donating to Hygge-lism, in order to increase our content, quality and time commitment.